Metal 250 is a 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. It will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools.
Multi-purpose durable repair composite
Fully machinable using conventional tools Application & cure at room temperature - no hot work involved
Simplify maintenance procedures
Reduce the need for spare parts
Cuts downtime
Improve safety by reducing hot work
Repair of cracks and holes on engine and pump casing, pipes, tanks and other equipment resurface of pitted metal surface.
Repair of damaged shafts and hydraulic rams In-situable flange repair.
High strength structural adhesive for metal bonding.
Epoxy-based composite for metal repair.
Metal 250 can be applied without the need for specialist tools. It will bond to almost any surface and can be machined using conventional tools. This multi-purpose repair composite will not corrode and is resistant to a wide range of chemicals. Metal 250 provides complete solution to your repair and maintenance needs.
Physical Properties of steel filled Metal-250 (Typical Values ) | |||||||||
---|---|---|---|---|---|---|---|---|---|
Density | Impact | compression | Flexural | Tensile | Hardness | Tensile Adhesive | Shear Adhesive | Dl-Electrical Strength | water Absorption |
G/ml | Kg cm/cm2 | Kg/cm2 | Kg/cm2 | Kg/cm2 | Shore-D | Ms to ms Kg/Cm2 | Ms to ms Kg/Cm2 | Kv/mm | (24 hrs RT) % by wt |
2.70 | 5.670 | 648 | 979.70 | 372.15 | 80-84 | 125 | 75 | 10 | 0.162 |
Metal 250 provides complete solution to your repair and maintenance needs.
Storage : Store in cool dry place away from heat and sunlight.
Shelf Life : Twelve months from the date of manufacture at or below 25° in original sealed packing.
All types of metals
Plastics
PVC
Glass
Fiberglass
Wood
China Clay
Ceramic
concrete
Stone and more
Undersized/scored shafts
Stripped threads
loppy key ways
Fractured and holed castings
Scored machine beds
Oversized bearing/bush housings
Distorted flange faces
Leaking tanks
Scored hydraulic rams
Fractured pipes
Roughened the surface of application area.
Mix 2 Part of Resin with 1 Part of Hardener & Stir it, Till it is homogenous.
Clean well and apply metal 250 at the joint & press hard. It will set in 5/6 hours.
For best result allow it to cure for 24 hours. This will set the compound fully.
Finish as per desired shape by sanding, grinding or machining.
500 gm.